Do you feel like your key fob is glued to your hand? If it’s a Jeep Grand Cherokee, that might be because it is glued to your hand. The fobs are notorious for falling out of pockets, getting stuck under seats, or falling into the crack between the seat and console. But there’s good news: replacing the key fob’s battery is quite simple. In this article, we’ll get you up to speed on what you need to know about replacing the battery in your key fob, as well as tips on how to do so. Read on for more…
What You Need to Know About Replacing the Battery in Your Key Fob
If your key fob’s battery is getting weak, it’ll start to show signs of weakness. How quickly it deteriorates depends on the key fob model, its exposure to heat, and the amount of use it gets. Cars are hot environments, and leaving the key fob in your pocket can easily cause the battery to die within a year or two. Luckily, replacing the battery in your key fob is a simple process — so long as you know what you’re looking for.
When to Replace the Battery in Your Key Fob
If your key fob is getting flaky or dying too quickly, that’s your first sign that it’s time to replace the battery. Another telltale sign is if your fob is running out of juice faster than it used to — that could be an indicator that it’s time to replace the battery. Once you’ve determined it’s time to replace the battery, check the expiration date stamped on the side of the battery. If you’ve had the key fob and battery for a while and the battery is near the end of its shelf life, it’s a good idea to replace both.
How to Replace the Battery in Your Key Fob
The first thing you’ll want to do is pry open the back of the key fob to get at the battery. There will usually be some sort of screwdriver-like tool in the box with your new key fob — but if not, a butter knife or other flat, non-scratching tool will do the trick. For some models of key fobs, you’ll need to take out the screw holding the battery in place first. Others will have a latch on the side that you can push to pop the battery out. Once the battery is out, you can install your new battery and close the fob backup.
3 Common Problems With Jeep Grand Cherokee Key Fobs
If you’re experiencing issues with your Grand Cherokee key fob, there are a few common problems to look out for: – The battery is dying — replace it as soon as possible. – The key fob is out of range — try moving closer to the car. – The remote was dropped in water — try letting it dry out for a few days before trying to use it. If none of those seem to apply to your situation, it might be a good idea to take your key fob to a dealer or repair shop for a diagnostic.
The Jeep Grand Cherokee key fob is a very useful device, but it can easily be rendered useless due to the battery dying. Thankfully, the battery can be replaced quickly and easily, allowing you to continue using the key fob without interruption. If you’re experiencing issues with your Grand Cherokee key fob, there are a few common problems to look out for: The battery is dying — replace it as soon as possible. The key fob is out of range — try moving closer to the car. The remote was dropped in water — try letting it dry out for a few days before trying to use it. If none of those seem to apply to your situation, it might be a good idea to take your key fob to a dealer or repair shop for a diagnostic.