Jeep Gladiator Trailer Brake Controller

Jeep Gladiator Trailer Brake Controller

The Jeep Gladiator is a midsize SUV that is capable of towing up to 7,650 pounds and is similar in size to the Jeep Wrangler. But there’s an important difference: while the Gladiator can tow more than three thousand pounds, the Wrangler is limited to three hundred. Mopar and Jeep have been promising a trailer brake controller for some time, and now the device is finally available. It costs $299 and can be retrofitted to your existing Jeep vehicle.

Tow-Pro brake controller

The Tow-Pro Jeep Gladiator brake control has been specifically designed for the JL Wrangler and Gladiator and is designed to plug into the dash panel where the 12V outlet was. The controller provides the proper stopping power to the trailer brakes. It is compatible with Wrangler and Gladiator models manufactured from 2020 to 2022. This product comes with a wiring harness and fitting instructions.

The Tow-Pro Jeep Gladiator brake control is easy to install and use. It connects to the brake controller via a harness. The harness plugs into the electrical brake controller connector, which can be easily accessed from the factory. The controller provides the brake control signal for the trailer brakes.

The Tow-Pro Jeep Gladiator brake control is compatible with Automatic Transmission vehicles. It also comes with a control lever, which activates the trailer brake independently of the truck’s brakes. It also works with trailer brakes that have three axles.


A trailer brake controller is a vital piece of towing equipment. It sends a signal to the trailer brakes to slow the truck down and stop. The unit is required by Colorado law for towing a trailer. The system has a MSRP of $299 and is covered under Mopar’s 2-year warranty for unlimited miles.

The Jeep Gladiator trailer brake controller is easily integrated into the instrument panel of the vehicle. It sits in front of the shift lever and features a round knob to blend in with the interior. The unit can also be retrofitted onto an existing Jeep Gladiator. It will cost you $299 and will allow you to tow up to 7,650 pounds of cargo.

Mopar offers over 500 parts for the Jeep brand, including the Trailer Brake Controller for the Gladiator. It works by activating electronic trailer brakes to increase stopping power on downhill grades. It also reduces wear and tear on the pickup truck. The unit comes with a round knob that allows you to adjust its load requirements for the trailer. You can buy the controller separately or as a package with other Jeep parts.


A Jeep Gladiator brake controller is an optional part that helps you drive safely when towing a trailer. It can activate electronic brakes on a trailer to help you stop quickly on steep downhill grades, minimizing the wear and tear on your pickup truck and trailer. This device comes with a round knob that lets you set the brake pressure to match the load. It is available as a stand-alone accessory in the U.S., and will cost about $299.

The Jeep Gladiator has been designed to be the most capable truck in the Jeep line. Its 3.6-liter Pentastar V6 engine provides up to 1,700 pounds of payload and has a 7,650-pound towing capacity. Mopar announced this new trailer brake controller on their website a few months ago, and it can be retrofitted onto older Jeep models.

The Jeep Gladiator brake controller is available for purchase from Mopar for a suggested retail price of $299. It fits neatly into the instrument panel and features a round knob for ease of use. It will enhance the safety and convenience of the driver, reduce stopping distances when towing a trailer, and prolong the life of brake pads.