Jeep Cherokee Won’t Start? Brake Pedal Hard? Here’s What You Need to Do

The Jeep Cherokee is a compact SUV that has been available since 1983. This popular car is known for its go-anywhere, do-anything capabilities. The Cherokee offers many different features to help you on your next adventure, including standard 4WD, electronic locking differentials, and hill-start assist. If you own a Jeep Cherokee, then you know how great it feels to drive this fun and capable SUV. However, owning any car has its challenges from time to time. Whether you have difficulty starting the engine or something feels out of place when operating the vehicle, these problems are common with any car. Here’s what you need to do if your Jeep Cherokee won’t start or if there is something wrong with the brake pedal in your car.

Why Won’t My Jeep Cherokee Start?

If your Jeep Cherokee won’t start, then it is likely that something is wrong with the car’s electrical system. You should first check the car’s battery to see if it is low or has a weak charge. If the battery is low, then you will need to charge it before trying to start the car. If the battery charge is normal, then you should also inspect the starter and starter solenoid. Most modern vehicles use a computer to manage the engine, transmission, and other systems. The computer receives signals from sensors throughout the vehicle, such as the starter. If these sensor signals are incorrect, then the computer will not let you start the engine. Sometimes, these sensor signals become corrupted, or the computer malfunctions and sends incorrect or no signals to the starter. This can cause the starter to fail and prevent the engine from turning over.

What To Do When Your Jeep Cherokee Brake Pedal Feels Hard?

If your brake pedal feels hard, then it means you have low brake fluid and need to add more. The brake fluid should be checked and refilled every two years. There are two different brake systems in modern vehicles: hydraulic and vacuum. The Jeep Cherokee uses the hydraulic brake system, and this system uses brake fluid to distribute pressure between the brake pedal and the car’s brake pads. The pressure inside the brake fluid lines is what causes the brake pedal to feel firm. If the fluid level becomes too low, then the pressure inside the lines drops, and the brake pedal will feel soft. If the brake fluid level becomes abnormally high, then the pressure inside the lines increases, and the brake pedal will feel hard.

Why Doesn’t My Jeep Cherokee Automatically Start?

There are a few things that can cause your Jeep Cherokee to not automatically start. First, you should check the transmission fluid level, as a low fluid level can cause the transmission to fail to shift into gear. If the transmission fluid is low, then add more fluid to bring it back up to the recommended level. You should also check the transmission computer and make sure it is connected properly and functioning properly. If these issues do not cause a problem, then you should check the ignition switch and ignition module.

What to Do If Your Jeep Cherokee Shakes While Starting?

If your Jeep Cherokee shakes while starting, then the vehicle may have a misfire. If one or more cylinders do not fire correctly, then the engine will shake. To fix this issue, you need to check the engine’s ignition coil. If the ignition coil is faulty, then you need to replace it. If the coil is not faulty, then you may have a loose spark plug connection, as this can also cause a misfire.

Why Is the Brake Pedal Hard on a Jeep Cherokee?

If the brake pedal is hard on your Jeep Cherokee, then you may have low brake fluid. This happens when the fluid level drops below the recommended mark. To correct this issue, add brake fluid to the appropriate level. You should also inspect the brake fluid lines to see if they are located in a place where they could become pinched. If they are, then you need to reposition the lines, so they do not pinch. If you have inspected the lines, and replaced the fluid and the brake pedal is still hard, then you may have a faulty brake booster.

Jeep Cherokees are great SUVs that are built with functionality and durability in mind. Because of this, Cherokees are able to go anywhere and handle any situation without fail. There are, however, times when something goes wrong with your Jeep Cherokee, such as it won’t start or the brake pedal feels hard. These are simple issues that can be solved with a bit of time and effort. With these common Jeep Cherokee issues in mind, you will be able to troubleshoot and repair them quickly.